Lift the Flow Manifold Housing up and away from the Filter Box. Using the included Cleaning Brush, thoroughly clean out the interior chamber of the Spray Bar(s). Grasp the Spray Bar Adjustment Knob(s) and gently pull the Spray Bar(s) out and away from the Filter Box. NOTE: Do not squeeze clip(s) sides together. With your thumb and index finger, push both sides of the clip(s) down. Locate the Spray Bar Release Clips, between the Spray Bar Adjustment Knob(s) and the Filter Box. Gently lift up on the Intake Tube by grabbing the Tube near the top and slowly sliding it up and away from the Filter Box. Remove the Intake Tube, with Strainer, optional Intake Extension Tube, and optional Mid-Level Strainer attached. Unplug the Emperor BIO-Wheel Power Filter. As long as the BIO-Wheel(s) is turning - even intermittently - it is functioning properly.Ĭheck to ensure debris build-up is not hindering the flow of water through either the Rite-Size "E" Filter Cartridge(s) or optional Media Container(s).Ĭheck to ensure an adequate amount of water is entering and leaving the BIO-Wheel Power Filter.Ĭheck to ensure BIO-Wheel Bearings are clean and allow the BIO-Wheel to rotate freely. NOTE: The speed at which the BIO-Wheel turns does not matter. Check to ensure that the Intake Tube, Strainer, and Mid-Level Strainer is not clogged with debris.Ĭheck to ensure that the BIO-Wheel(s) is turning.
0 kommentar(er)
